New Anodized 1x Chainring Bolt and Nut Sets
The Newest Addition to Our Chainring Bolt Line
Meet our 1x single-chainring optimized bolt sets. Precision-crafted to exceed industry standards, these bolts feature a 5 mm hex socket on the bolt and a 6 mm hex socket on the nut, so you can install and service them without a spanner. Available in 8 anodized colors.
At 6 mm overall length, they’re a perfect fit for bolt-on single chainrings without threaded standoffs. Upgrade to a reliable, durable setup that stays quiet and tight.
Tech Specs
- Thread: M8
- Overall length: 6 mm
- Material: 7075-T6 aluminum
- Interfaces: 5 mm hex bolt / 6 mm hex nut
Tired of loose, creaky bolts or juggling a spanner? Use this simple guide to install Wheels Manufacturing 1x single-chainring bolts:
Installation Guide
Step 1: Get Your Tools Ready
Gather a 5 mm hex wrench, 6 mm hex wrench, and a torque wrench.
Step 2: Remove the Old Bolts
Using the correct hex size for your current hardware, turn counter-clockwise to remove. Keep track of any washers.
Step 3: Clean the Chainring
Wipe mating surfaces with isopropyl alcohol or degreaser to remove grime that could cause creaks or loosening.
Step 4: Install the New Bolts
Lightly grease the threads. Insert bolts so the heads sit flush. Hold the nuts with a 6 mm hex and snug by hand.
Step 5: Torque Evenly
Using a torque wrench, tighten to 8 Nm in a star pattern. Do not over-tighten.
Step 6: Test and Recheck
Confirm each bolt is at 8 Nm. After your first ride, recheck torque.
Make the upgrade and enjoy a quieter, cleaner, easier-to-service setup.
Upgrade your ride with our new anodized 1x chainring bolt & nut sets!
Prefer a direct link? Visit: /collections/fasteners-ferrules-brake-rim-parts
