These extractors remove sealed bearings with inside diameters from 15,17,20 and 25mm.
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 6002, 6003, 6802, 6803, 6804, 6805, 6902, 6903, 6904
Color | Black |
---|
4-piece set includes:
Removes these sealed bearing sizes: 6002, 6003, 6802, 6803, 6804, 6805, 6902, 6903, 6904,
See our step-by-step instructional guide here.
Bearing extractor requires the following tools:
OR |