386EVO Angular Contact BB for 24/22mm (SRAM) Cranks - Black
Threaded BB for 386EVO frames and 22/24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
- Wheels Mfg 386EVO BB for use with 24/22mm spindle cranks will not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). If your Quarq spider has an ID less than 49.5mm, your crank may rub on the BB cup.
- Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB.
- Bearings: Enduro Angular Contact
- Color: Black
- Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
- Bottom Bracket Shell Width (mm): 86mm - 92mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 22/24mm
- Weight: 145g
- Packaged for retail display
Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86mm - 92mm wide BB shell):
Compatible with 22/24mm stepped spindle diameter cranksets, like SRAM & Truvativ GXP.
Compatible with Quarq DZero powermeter spiders with GXP spindles except Eagle MTB.
Wheels Mfg 386EVO BB for use with 24/22mm spindle cranks will not work with Quarq SRAM/GXP cranksets (Elsa, Riken, SRAM Red 22, SRAM S975, SRAM S2275, CinQo Saturn, Saturn2). The outer diameter of the bottom bracket cup faces are slightly larger than the recessed section of the Quarq power meter and the two will rub together. If your Quarq spider has an ID less than 49.5mm, the crank may rub on the BB cup.
- Includes older Saturn power meters that use CR2450 batteries
- Includes newer 3-bolt and 8-bolt Mercury power meters
Enduro Angular Contact Sealed Bearings
Enduro Angular Contact bearings are specifically designed for hubs and bottom brackets. In standard radial bearings, only 3 or 4 balls make contact during the load, at any given time. In Angular Contact bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction, and minimize wear.
Grade 5 Chromium Steel Balls:
- High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
52100 High Carbon Chromium Alloy Races:
- Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
Graphite/Nylon Ball Retainers:
- Nylon with graphite retainers are virtually frictionless while providing constant lubrication.
Filled with Rheolube special synthetic grease formulated in the USA, the balls are micro-coated with long lasting protection from friction. "LLB" dual lip groove seals and another external seal with dual lips on both sides and made from the best Silicone material guards from water and dirt penetration.