Home /
Products /
BB30/PF30/BBRight/386EVO & Bottom Brackets /
PressFit 30 Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)

PressFit 30 Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)

Part Number: PF30-SHIM

$30.00 (MSRP)

Qty:

The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames

Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our BB30 spacer kit to adjust your chainline, or take up any side-to-side movement in your cranks.

(NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter)

Machined engineering-grade Delrin. 48g/pr

3) Pressfit 30 Adapter installed

Double click on above image to view full picture

More Views

Technical Help

PF30-SHIM Adapter Installation

If not already installed, press the PF30 bottom bracket cups into frame.
Remove outer dust covers, if present. (Do not remove the bearing seals).
Identify left and right side adapters.
Start inserting adapters into bottom bracket bearings by hand.
Seat adapters using a rubber mallet.
Install crank spindle through the adapters and tighten per manufacturer’s instructions.
Take up any play in your cranks with our BB30-SPC spacers. Place the spacers as shown below.