BB30 Adapter for Campagnolo Cranks

Part Number: BB30-CAMP

$50.00 (MSRP)

Qty:

BB30-CAMP adapts Campagnolo Ultra-Torque cranks to BB30-standard frames

This adapter fits over the installed crank bearing so no bearing removal is required for installation

Note: The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.

Machined engineering-grade Delrin. 48g/pr

Campagnolo Ultra-Torque Adapter in BB30 Frame

Double click on above image to view full picture

More Views

Confirm that all clips and bearings are properly installed into BB30 bottom bracket shell.
Identify left and right side adapters.
Install the RIGHT adapter into the 6806 bearing on the right (drive-side) of the bottom bracket. Tap into place with a soft-faced mallet.
Install the LEFT adapter into the 6806 bearing on the left side of the bottom bracket. Tap into place with a soft-faced mallet.
Push the right crank with its factory-installed bearing into the right adapter. Tap into place.
Push the left crank with its factory-installed bearing into the left adapter. Align correctly with the right crank and tap into place. NOTE: The wave washer goes between the crank bearing and the left side adapter.
Tighten the Campy Ultra-Torque crank to Campagnolo Specifications.

BB30-CAMP adapter over drive-side bearing

BB30-CAMP non-drive side adapter
(Note placement of wave washer)

BB30-CAMP with crank arms installed

My Cart

You have no items in your shopping cart.

FAQs