BB30 Adapter for SRAM Cranks

1. Confirm that all clips & bearings are installed into BB30 bottom bracket shell.
2. If using SRAM/Truvative GXP cranksets, identify left and right side adapters.
3. Start inserting adapters into bottom bracket bearings by hand.
4. Seat adapters using a rubber mallet.
5. Install crank spindle through adapters and tighten per manufacturer’s instructions.
6. Take up any play in your cranks with our BB30-SPC spacers. Place the spacers as shown below.

Insert adapters in bearings.

Seat adapters using a rubber mallet.

Adapters with crank installed.