386EVO Adapter for SRAM Cranks

1. If not already installed, press the PF30 bottom bracket cups into frame.
2. Remove outer dust covers, if present. (Do not remove the bearing seals).
3. Identify left and right side adapters.
4. Start inserting adapters into bottom bracket bearings by hand.
5. Seat adapters using a rubber mallet.
6. Install crank spindle through the adapters and tighten per manufacturer’s instructions.
7. Take up any play in your cranks with supplied BB30-SPC spacers. Place the spacers as needed.

Insert 386EVO adapters in  bearings.

Seat adapters using a rubber mallet.

Adapters with crank installed.