Introducing our new system for adapting Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, Cannondale BB30a, etc.

These new Universal Adapters are available individually for Shimano, 24mm spindle or SRAM/Truvativ cranks. Each one-bike package includes enough spacers for virtually any BB30/PF30 conversion, including Cannondale BB30a. (Compatible with BB30/PF30 bottom bracket shells from 68mm to 83mm in width.)

Unversal Adapters are also available in a convenient shop kit that converts up to 8 bikes. Extra spacers and wave washers are included for use on additional conversions and for chainline adjustments and crank spacing. An adapter puller is included with each kit to help remove the adapters from the 6806 bearings.

The BB30/PF30 Universal Adapter Kit is a life saver for busy service departments that never know what type of bike will be coming in the door.

PF30 Outboard Bottom BracketWant a simpler solution than using adapters?


Our outboard bearing bottom bracket solutions allow you to use 24mm and 24/22mm cranks in BB30 and PF30 frames without the need for adapters. We've offer bottom brackets that place the proper size bearings for Shimano, FSA, SRAM, Truvativ and any other 24mm and 24/22mm cranks in a serviceable machined aluminum bottom bracket.

Simplify your setup and upgrade your bottom bracket at the same time!

Tech Help

Find the correct adapter by Crank & BB
Complete Crank / BB Adapter Guide

helpchart

Still Need Help?

Click here to send us a picture of your frame's bottom bracket...

4 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Universal BB30/PF30 adapter for 24mm (Shimano) Cranks

    BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)

    $29.50

    BB Universal Adapters Installation

    The BBUNIV-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.

    • Includes 2 adapter shims and a 14-piece assortment of left and right side spacers.
    • Machined engineering-grade Delrin.

     

    Note: For Cannondale BB30a & PF30a frames and Shimano 24mm spindle cranks, use our BBright, BB30a & PF30a Adapter for 24mm Spindle Cranks.

    Precision Machined

  2. BB/PF30 Universal Adapter for 22/24mm (SRAM/Truvativ) Cranks

    BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)

    $29.50

    BB Universal Adapters Installation

    The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, Cannondale BB30a & PF30a, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.

    For use only with bottom bracket shell widths from 68mm to 83mm.

    • Includes 2 adapter shims and a 15-piece assortment of left and right side spacers.
    • Machined engineering-grade Delrin.

    Precision Machined

  3. BB/PF30 Universal Service Kit for Shimano and SRAM cranks

    BB/PF30 Universal Service Kit for Shimano and SRAM cranks

    $200.00

    10 bikes worth of adapters in one kit!

    Adapt Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.

    • 5 each Shimano and SRAM adapter sets
    • Extra spacers for chainline adjustment
    • (4) GXP wave washers
    • (4) 30mm ID wave washers
    • Machined engineering-grade Delrin.

    Precision Machined

  4. 24mm x 1mm crank spindle spacers

    Crank Spindle Spacers

    Price From: $1.00

    Used to adjust crank chainline or take up any slack when using 30mm, 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similar crank system.

    • 24mm I.D. for use with cranks like Shimano HollowTech II, GXP, FSA
    • 30mm I.D. for use with BB30 cranks
    • Machined engineering-grade Delrin.


    Precision Machined

4 Item(s)

per page

Grid  List 

Set Descending Direction
We'd like to keep you up-to-date.
Sign up for our newsletter and create an account to receive 15% off a future order.