PressFit 30 Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)

Part Number: PF30-SHIM

$30.00 (MSRP)

The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames

Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks.

(NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter)

Machined engineering-grade Delrin.  48g/pr

NOTE: PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use our BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets.

 

PF30 Outboard Bottom Bracket

Want a simpler solution than using adapters?

Our new outboard bearing bottom bracket solutions allow you to use 24mm and 24/22mm cranks in BB30 and PF30 frames without the need for adapters. We've created a bottom bracket that places the proper size bearings for Shimano, FSA, SRAM, Truvativ and any other 24mm and 24/22mm cranks in a serviceable machined aluminum bottom bracket.

Simplify your setup and upgrade your bottom bracket at the same time!


Precision Machined

Wheels Mfg PF30 Adapter for 24mm (Shimano) Cranks

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

You may also be interested in the following product(s)

PressFit 30 to Outboard Bottom Bracket for 24mm Cranks (Shimano)

PressFit 30 to Outboard Bottom Bracket for 24mm Cranks (Shimano)

$74.00 (MSRP)
BB30 to Outboard Bottom Bracket for 24mm Cranks (Shimano)

BB30 to Outboard Bottom Bracket for 24mm Cranks (Shimano)

$74.00 (MSRP)
   

PF30-SHIM Adapter Installation

  1. If not already installed, press the PF30 bottom bracket cups into frame.
  2. Remove outer dust covers, if present. (Do not remove the bearing seals).
  3. Identify left and right side adapters.
  4. Start inserting adapters into bottom bracket bearings by hand.
  5. Seat adapters using a rubber mallet.
  6. Install crank spindle through the adapters and tighten per manufacturer’s instructions.
  7. Take up any play in your cranks with our Crank Spindle Spacers. Place the spacers as shown below.

 

PF30 Adapter Installation

Insert PF30 adapters in PF30 bearings.


PF30 Adapter Installation

Seat adapters using a rubber mallet.


PF30 Adapter Installation

Adapters with crank installed.

BB30 Install Assembly