A new line of Made In The USA headset tools. Now Available.

Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift had two sizes to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings.

Position
Set Descending Direction

Grid List

5 per page

3 Item(s)

  1. NEW
    Headset Cup Press

    Headset Cup Press

    $125.00

    Headset Cup Installation

    Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift had two sizes to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings.

    • Machined aluminum handles and drifts
    • Red anodized drifts and handles
    • Zinc-plated 1/2" diameter threaded rod
    • Long threaded rod works with long head tubes up to 250mm
    • Includes one Head Tube Drift
    • Includes one Headset Cup Drift

    Precision Machined

  2. NEW
    Headset Cup Press

    Headtube Drift

    $40.00

    Headset Cup Installation

    Headtube drifts for use with the Wheels Mfg Headset Cup Press. 1/2" thru hole. Drift is machined with multiple steps to fit common head tube inner diameters listed below. Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles and rod, which have a smaller 3/8" diameter rod.

    • Machined aluminum
    • Red anodized
    • 1/2" hole for use with Wheels Mfg Headset Cup Press (PRESS-8) only. Not for use with our PRESS-1 or PRESS-4 handles.
    • Headtube drift fits the following Inner Diameters:
      • 34mm
      • 44mm
      • 49mm
      • 56mm

    We do not recommend it for use with our PRESS-1 or PRESS-4 handles, or any other press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups from pressing in straight.

    Precision Machined

  3. NEW
    Headset Cup Press

    Headset Cup Drift

    $40.00

    Headset Cup Installation

    Headset cup drifts for use with the Wheels Mfg Headset Cup Press. 1/2" thru hole. Drift is machined with steps to fit common headset cups with 1-1/8" and 1-1/2" bearings. May work with other size cups. Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles and rod, which have a smaller 3/8" diameter rod.

    • Machined aluminum
    • Red anodized
    • 1/2" hole for use with Wheels Mfg Headset Cup Press (PRESS-8) only. Not for use with our PRESS-1 or PRESS-4 handles.
    • Headset cup drift fits the following Inner Diameters:
      • 1-1/8" (30mm)
      • 1-1/2" (40mm)

       

    We do not recommend it for use with our PRESS-1 or PRESS-4 handles, or any other press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups from pressing in straight.

    Precision Machined

Position
Set Descending Direction

Grid List

5 per page

3 Item(s)