22mm GXP Sealed Bearing Extractor



In stock


Individual extractor for easily removing sealed bearings with an inner diameter of 22mm. Insert the extractor into the bearing, tighten up one side with an allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a hammer and punch.

Removes the following:

Made In the USA



  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7

Step 1

To remove sealed bearings you will need the following:

  • Correct size bearing extractor
  • 8mm & 10mm wrenches (for small sized extractors)
  • 13mm and 1” wrenches (for large sized extractors)
  • Hammer and punch


Bearing Extractor Step 1

Step 2

The correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extract.
Bearing Extractor Step 2

Step 3

Place extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractor.
 Bearing Extractor Step 3

Step 4

Tighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the i.d. of the sealed bearing.
 Bearing Extractor Step 4

Step 5

Once the extractor is secured, align a punch with back side of the extractor.
Bearing Extractor Step 5 

Step 6

Gently tap on the punch until bearing is removed along with the extractor.
 Bearing Extractor Step 6

Step 7

The bearing is now removed. Install new sealed bearings  with a Wheels Mfg PRESS-1 or PRESS-4.
 Bearing Extractor Step 7

You might also like...