PF30 Ceramic Hybrid BB (Red)

BB InstallationOur original PF30 bottom bracket is a significant upgrade to any OEM PF30 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.

Direct replacement for SRAM, FSA, and other PressFit 30 bottom brackets!

Precision Machined

 

$125.00
In stock
SKU
PF30-BB-CER-RED

This item can be purchased from our online partner BICYCLEPARTSDIRECT.COM

Authorized Wheels Manufacturing re-sellers please log in first to purchase items.

  • Bearings: Enduro Ceramic Hybrid
  • Color: Red
  • Bottom Bracket/Frame Interface: PF30, BB386EVO, Specialized Carbon OSBB, BBRight™ Press Fit
  • Bottom Bracket Shell Width (mm): 61mm to 86.5mm
  • Bottom Bracket Shell I.D.: 46mm
  • Crank Spindle Type: BB30
  • Crank Spindle Diameter: 30mm
  • Weight: 104g
  • Packaged for retail display
  • Will accept 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims

Directly replaces all OEM PF30 bottom brackets.

Compatible with the following Bottom Bracket Standards:

  • PF30
  • BB386EVO
  • Specialized Carbon OSBB
  • BBRight™ Press Fit

Enduro Ceramic Bearings

Enduro Ceramic Hybrid 6806 Bearings

Enduro Ceramic Hybrid bearings have Grade 5 ceramic balls with ABEC 5 chromium steel races.  Bearings are made from pure Silicon Nitride material with extreme high density from uniform compaction, the micro-structural development of this material during manufacturing is second to none.

Grade 5 Si3n4 Ceramic Balls:

  • High precision balls are within 5/1,000,000″ round, 60% lighter weight, and 7 times harder than steel.

52100 High Carbon Chromium Alloy Races:

  • Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.

The bearing seals are dual lip, groove type seals rather than standard 2RS types that other manufacturers use; one lip to keep the dirt out and the other to keep the 90% grease fill inside. Bearings are filled both sides with Rheolube grease for the best protection and long lasting set up. Another external seal with dual lips on both sides and made from the best Silicone material guards from water and dirt penetration.

We back them up with a 1 year warranty.*

Download: PF30 Ceramic Hybrid Installation / Warranty Download PDF File

Life expectancy of Wheels Mfg bottom brackets and bottom bracket sealed bearings depends on factors like frequency of use, environmental conditions and intended use. It is important to maintain bearings to increase lifespan. Please see the section How to maintain sealed bearings for more information.

Extent of Limited Warranty

Wheels Mfg warrants its Bottom Bracket components to be from defects in materials or workmanship for a period of 2 years after original purchase. Bearing warranties are as follows.

  • Enduro Sealed bearings - standard ABEC-3 or ABEC-5. NO warranty.
  • Enduro Sealed bearings - Angular Contact, Angular Contact Ceramic, Ceramic Hybrid or ZERØ Ceramic Hybrid. 1 year warranty against defects in workmanship or materials.
  • Remaining Wheels Mfg Bottom bracket components - 2 year warranty against defects in workmanship or materials.

This warranty only applies to the original owner and is not transferable. Claims under this warranty must be made through the retailer where the Wheels Mfg component was purchased. Original proof of purchase is required.

Limitations of Warranty

This warranty does not apply to products incorrectly installed and/or adjusted according to the respective Wheels Mfg installation instructions/owner manual. The Wheels Mfg manuals can be found online at wheelsmfg.com. Failure to use correct installation or removal tools will result in damage not covered by warranty.

This warranty does not apply to damage to the product caused by crash, impact, abuse of the product, or unusual installations resulting in subjecting the product to excessive forces or loads beyond its design.

This warranty does not apply when the product has been modified.

This warranty does not apply to normal wear and tear. Wear and tear parts are subject to damage as a result of normal use, failure to service according to Wheels Mfg recommendations, and/or riding in conditions or applications other than recommended.

This warranty does not apply to improperly maintained bearings, in accordance with the Wheels Mfg bearing maintenance information found online at wheelsmfg.com

Wear and Tear bottom bracket parts are identified as:

  • Dust seals
  • O-rings
  • Stripped threads
  • Corrosion
  • Bearing races

Exchanging a Wheels Mfg Bottom Bracket

Warranties only apply to the original owner and are not transferable. Claims must be made through the retailer where the Wheels Mfg component was purchased. Original proof of purchase is required. If original retailer is unavailable, exchanges or claims can be made direct to Wheels Mfg. Direct contact is required before shipping back product and original proof of purchase is required. Email us (customerservice@wheelsmfg.com) or call (1-800-361-8422) for a Return Authorization number Freight charges to Wheels Mfg. are the responsibility of the customer.

We found other products you might like!