BB30 Outboard Angular Contact BB for 24/22mm Cranks (SRAM) - Black

BB30-OUT Installation

Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.

Specifically designed for installing 22mm/24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30 (42mm ID BB shell) frames without the need for any adapters.

Precision Machined

 

MSRP $99.00
In stock
SKU
BB30-OUT-9
  OR   

Authorized Dealers Login To Purchase.

  • Non-Drive Side Bearing: Enduro Angular Contact
  • Drive Side Bearing: Enduro ABEC-3
  • Color: Black
  • Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB
  • Bottom Bracket Shell Width: 68mm - 73mm
  • Bottom Bracket Shell I.D.: 42mm
  • Over Bearing Width: 91.0mm in 68mm wide shell*
  • Crank Spindle Diameter: 22mm/24mm
  • Tool Pattern: 44mm, 16-notch
  • Weight: 145g
  • Packaged for retail display

* Over Bearing Width Dimensions include supplied silicone dust shields.

Compatible with the following Bottom Bracket Standards (42mm BB shell inner diameter):

  • BB30
  • Specialized Alloy OSBB

Compatible with 22/24mm stepped spindle diameter cranksets, like SRAM & Truvativ GXP.

Enduro Bearings

Enduro ABEC-3 Bearings

Grade 10 Chromium Steel Balls:

High precision balls are within 10/1,000,000″ round, twice as round as the industry standard, at it’s highest level.

52100 High Carbon Chromium Alloy Races:

Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance


Enduro Angular Contact Bearings

Enduro Angular Contact Sealed Bearings

Enduro Angular Contact bearings are specifically designed for hubs and bottom brackets. In standard radial bearings, only 3 or 4 balls make contact during the load, at any given time. In Angular Contact bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction, and minimize wear.

Grade 5 Chromium Steel Balls:

  • High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.

52100 High Carbon Chromium Alloy Races:

  • Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.

Graphite/Nylon Ball Retainers:

  • Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

Filled with Rheolube special synthetic grease formulated in the USA, the balls are micro-coated with long lasting protection from friction. "LLB" dual lip groove seals and another external seal with dual lips on both sides and made from the best Silicone material guards from water and dirt penetration.

We back them up with a 1 year warranty.*

Note: if your BB shell is slightly oversize, two BB wrenches may be required to fully tighten cups in frame.