BBright Adapter for Shimano Cranks

Part Number: BBRIGHT-SHIM

$50.00 (MSRP)

Adapts Shimano 24mm spindle cranks to most  BBRight-standard frames.

Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, and R5 VWD  (Not compatible with R5ca direct-fit bb)

Note: This adapter is not compatible with the FSA BBRight bottom brackets.

Includes eight 0.7mm shims for fine-tuning chain line

Machined engineering-grade Delrin.  48g/pr


 


Precision Machined

BBright Adapter for Shimano Cranks

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

BBRIGHT-SHIM Adapter Installation

  1. If not already installed, press Cervelo's PF30 bottom bracket cups into frame.
  2. Identify left and right side adapters.
  3. Start inserting adapters into bottom bracket bearings by hand.
  4. Seat adapters using a rubber mallet.
  5. Install crank spindle through the adapters and tighten per manufacturer’s instructions.
  6. Take up any play in your cranks with our Crank Spindle Spacers. Place the spacers as shown below.

 *** Wheels Mfg BBRight adapters are compatible with 2011-2012 Cervelo models R3, R3 Team, R5 and R5 VWD (not compatible with R5ca direct-fit bb) ***

BBRight Adapter Installation

Seat adapters using a rubber mallet


BBRight Drive-Side Adapter Installation

BBRight Drive-Side Adapter with Optional Spacers


BBRight Non-Drive-Side Adapter Installation

BBRight Non-Drive Side Adapter with Optional Spacer

BBRight Install Assembly